Production of Acrylic Products

The loss of acrylic products during processing is bound to occur, and some are unavoidable, but we can reduce its losses as much as possible during processing and production. So how to reduce this loss? The bar led ice bucket supplier will explain to you the issues that must be paid attention to during the processing of acrylic products.

1. Do not directly contact the wind

After hitting the glue, it is best not to directly touch the wind on the edges. Although the wind blows fast, it can indeed speed up the drying of the glue, but the edges will turn white due to the rapid volatilization of the glue.

2. Can not be directly exposed to sunlight

Acrylic adhesives cannot be exposed to direct sunlight for a long time before they are fully cured. If it is irradiated for a long time, it will make the adhesive surface yellow, which will affect the final aesthetics of the plexiglass products. Therefore, before using the plexiglass products, especially when used outdoors, be sure to wait until the adhesive is completely cured. Use is best.

3. Protect places that do not need bonding

When the acrylic product is bonded, the glue is highly corrosive. If it is dropped on the surface, it will leave traces that are difficult to remove. So be sure to use some things to protect the places that do not need bonding.

4. The bonding surface must be cleaned

LED acrylic ice bucket bonding surface to be cleaned, if there are impurities such as dust, bubbles will be generated when bonding, uneven glue flow.

4.  the amount of glue

During bonding, if the amount used is small, there will be no hitting phenomenon, and air bubbles will be generated. If the amount is too large, it will overflow, so be sure to pay attention to the amount of glue used when bonding, and pay attention to the problem of the amount of glue used in long-term processing.

5. Control temperature

Ordinary acrylic sheet will deform when the temperature is about 100 degrees, and acrylic products processed above this temperature will lose the unique characteristics of acrylic.

7.Avoid scratching

The hardness of acrylic, the hardness of the surface of the acrylic board is only equivalent to that of aluminum. When using or processing acrylic, you should be very careful to avoid scratching it to lose its surface gloss.

Led Acrylic Serving Tray 

8.Be careful of static electricity

LED acrylic serving tray processing also needs to pay attention to static electricity. In summer or dry acrylic processing workshops, it is easy to generate static electricity and absorb dust. When cleaning, wipe with a soft cotton cloth moistened with soapy water or sky water.

9.Reserve space for expansion

Acrylic casting plate will have a certain expansion coefficient during the processing of acrylic, so it must be considered to leave enough space for the expansion and contraction of acrylic plates during the stacking of acrylic plates or the processing of acrylic plates.

Our company is major in champagne led ice bucket, the LED acrylic shot glass serving tray and shot glass led serving tray are our main products.